Drip Irrigation Tape
All types of Drip Tapes Meet Your Needs
16mm drip tape
Most popular and ecomonic drip tape which is suitable for most drip irrigation projects.
- Wall Thickness: 0.15mm ~ 0.4mm, can be customized according to requirements.
- Flowrate: 0.8L/H, 1.1L/H, 1.38L/H, 2.0L/H, 3.0L/H, 4.0L/H.
- Spacing: 5cm~100cm, can be customized according to requirements.
- Working pressure: 1.0 bar.
22mm drip tape
Under the same working pressure and flow rate, a longer distance can be laid. Popular in Canada, Australia and Mexico.
- Wall Thickness: 0.17mm ~ 0.4mm, can be customized according to requirements;
- Flowrate: 0.8L/H, 1.1L/H, 1.38L/H, 2.0L/H, 3.0L/H, 4.0L/H
- Spacing: 10cm~100cm, can be customized according to requirements;
- Working pressure: 0.8 bar
Special color drip tape
Special color can be customized to the client’s requirements, popular colors are:
White outside and black inside: It is mostly used in high temperature areas or greenhouses. The white outer layer can reduce heat absorption, prevent the pipes from scalding the seedlings, and lower the water temperature in the pipes.
Silver outside and black inside: the same advantage as above
Features that we are super proud of
High Quality PE
Modern Labyrinth Design Dripper
Test reports of drip tapes
Useful tips you may want to know about.
How to lay the drip tapes?
When laying the drip line (drip tape) , the side with the dripper should be upside. The force should be uniform when stretched, and keep the drip line naturally straight.
Tips when use drip tape under mulch film
To use dark (black) mulch, or spread a thin layer of soil on the mulch above the drip line; Keep the ground level, or use other methods to prevent the plots and weeds from holding up the mulch film and forming small water droplets; Drip line should be as close as possible to the mulch when using, within 5mm is suggested
Tips when laying the drip line by machinery
Check whether there are iron slag, burrs and other problems which may hurt the drip line in the guide pulley, the guide ring and other parts. Should prevent the mechanical equipment from causing scratches and strains. The diameter of the guide pulley should not be less than 50mm
Pressure of water supply
The water supply pressure of the drip line system should be kept below 100Kpa
